Faucet Repair - Common Fault Troubleshooting
Publish Time: Author: Site Editor Visit: 33
1.Cold Water Faucet Water flow is bifurcated or the water volume is reduced, and there are no bubbles
Possible reasons: The filter of the bubbler is blocked by scale or debris and scale.
Solution: Remove the faucet and clean the filter.
2. The water flow of the shower is small and the water flow is bifurcated
Possible reasons: The water pressure is too low or there are debris or scale accumulation in the shower head.
Solution: Remove the shower head and take out the rubber gasket with filter at the water inlet of the shower or clean the shower head for cleaning.
3. There is noise when the faucet is turned on
Possible reasons: The water pressure is too high; the faucet handle is closed quickly; the hot and cold water pipes are not fixed well; there are obstacles or scale in the water inlet pipe.
Solution: Reduce the water supply pressure, avoid closing the faucet quickly and re-constructing, clean the pipes, and check whether the water pipes and connecting objects such as water purifiers and water heaters have poor contact.
4. The temperature is not easy to adjust and the water temperature often changes
Possible reasons: The pressure difference between hot and cold water is too large, or the water heater increases the water temperature for too long.
Solution: Adjust the hot and cold triangle valves to a smaller value to balance the pressure and ensure that the water temperature of the water heater can keep up with the water output speed.
